
Wood fences
Cedar and pine privacy fences, new or replacing the old one.
- Cedar or pressure-treated pine
- Posts set in concrete
- Old fence removed and hauled off
$25 to $45per ft installed, 6 ft tall
Ask for this
Concrete work around the property, from fence post footings to walkways and slabs.
Get your free estimate
No obligation. We call or text you back to set it up.
Concrete is part of every fence we build: it is what holds the posts in Houston clay. The same crew can pour the pad a sliding gate motor sits on, the walkway along the side of the house or a small slab, so you don't need a second contractor for the job next to the fence.
Tell us what you need poured and roughly how big it is. We look at the ground and the drainage, because water that pools against a slab or a fence line in Houston rain becomes a problem later.
The City of Houston requires a permit for masonry or concrete fences of any height, so a concrete or block wall is a different job from a concrete footing, and we tell you what applies before we start.

This is not a quote. It is an approximate range so you know what to expect. The exact price is set only after a free visit to see your property, because the ground, slope, access and the old fence all change the cost. You never pay anything you have not approved first.
For new fences and for posts reset during a repair.
The level pad a sliding gate operator needs.
Side-yard and front walkways.
Pads for a shed, an AC unit or a trash area.
Fill out the form, call, or text a photo. It takes about two minutes.
Helen in English or Carlos in Spanish, to set a time to see the job.
We look at the job and give you a clear price before any work starts.
Still have a question? Call or text us. There is no charge and no obligation.
Free estimateYes. Concrete can be done with your fence or on its own. Tell us what you need poured.
Yes. The City of Houston requires a permit for masonry or concrete fences of any height. Concrete footings for a wood or iron fence are a different matter.
Yes, and install the motor in the same job. See gate motors.

Cedar and pine privacy fences, new or replacing the old one.
$25 to $45per ft installed, 6 ft tall
Ask for this
Automatic openers for swing and sliding gates, plus keypads, remotes and repairs.
Priced after we see the gate
Ask for this
Remodeling projects for your home or business. Tell us what you have in mind.
Priced after we see the job
Ask for thisWe are based in southeast Houston (77061) and drive to each job. These are the areas we cover, with what matters for fences in each one.