
Wood fences
Cedar and pine privacy fences, new or replacing the old one.
- Cedar or pressure-treated pine
- Posts set in concrete
- Old fence removed and hauled off
$25 to $45per ft installed, 6 ft tall
Ask for this
Fences, gates, gate motors and welding repair in Hobby, Houston, with a free estimate. English or Spanish.
Get your free estimate
No obligation. We call or text you back to set it up.
This is home for Muniz Fence. ZIP 77061 sits around William P. Hobby Airport, between Sims Bayou, the Gulf Freeway and the railroad, and it is all City of Houston. It is the north end of the Greater Hobby super neighborhood, with streets like Glen Valley, Glenloch and Pecan Villas.
Being close means short drives and quick visits for estimates and repairs, whether it is a 1950s ranch in Glenbrook Valley with an old chain-link front, a pre-war house in Garden Villas or a business near the airport that needs its gate fixed.
Glenbrook Valley is a City of Houston historic district. Exterior changes there can need approval first, so before a front-yard fence it is worth asking the city's historic preservation office.
Sources: City of Houston, Glenbrook Valley historic district
Sims Bayou runs along the north edge of 77061. Its watershed has flooded homes many times, and the Harris County Flood Control District says its federal project greatly reduced that risk. Check your address on the county's flood map before building in a low spot.
About 73% of the Greater Hobby area's residents are Hispanic, and the housing ranges from pre-war homes by Sims Bayou to 1950s ranches.
Sources: City of Houston, Super Neighborhood 78 profile (2024) · City of Houston, Greater Hobby Area profile
Do you need a fence permit in Hobby?
This area is inside the City of Houston: a fence 8 feet tall or less does not need a city permit. A fence over 8 feet, or a masonry or concrete fence of any height, does. Deed restrictions and civic clubs can set their own rules.
Checked October 20, 2026 · Houston Permitting Center, residential fencing
General information, not legal advice. Rules change: confirm with the city or your HOA before you build.
ZIP codes
77061 · 77017 · 77087 · 77075
About 0 miles from our base in southeast Houston.

Cedar and pine privacy fences, new or replacing the old one.
$25 to $45per ft installed, 6 ft tall
Ask for this
Walk gates and driveway gates in iron or wood, built to swing without dragging.
$50 to $85per ft of iron fence, Houston average
Ask for this
Automatic openers for swing and sliding gates, plus keypads, remotes and repairs.
Priced after we see the gate
Ask for this
Broken hinges, snapped welds and sagging iron gates repaired instead of replaced.
Text a photo for a price
Ask for this
Leaning posts, loose pickets and storm damage. Small repairs are welcome.
$200 to $300typical repair in Houston
Ask for this
Fences and gates for lots, warehouses, shops and rental properties.
Priced per project
Ask for this
Concrete work around the property, from fence post footings to walkways and slabs.
Priced after we see the job
Ask for this
Remodeling projects for your home or business. Tell us what you have in mind.
Priced after we see the job
Ask for thisStill have a question? Call or text us. There is no charge and no obligation.
Free estimateNot for a fence 8 feet or less: 77061 is in the City of Houston. In Glenbrook Valley, ask the historic preservation office before a front-yard fence.
We are based here, so this is the shortest drive we have. Send the form or a photo and we set a time for the estimate.