
Wood fences
Cedar and pine privacy fences, new or replacing the old one.
- Cedar or pressure-treated pine
- Posts set in concrete
- Old fence removed and hauled off
$25 to $45per ft installed, 6 ft tall
Ask for this
Fences, gates, gate motors and welding repair in West University Place, TX, with a free estimate. English or Spanish.
Get your free estimate
No obligation. We call or text you back to set it up.
West University Place is a small city surrounded by Houston, about 10 to 11 miles from our base. Its fence code is detailed: no front-yard fences, a treated base board, and extra review for masonry near trees.
Fences up to 8 ft (6 ft near a neighbor's house in some cases), and front-yard fences are not allowed, with exceptions. A gate can be up to 12 in taller if it is 40% opaque or less.
The code calls for a treated 2x10 base board, a fence permit, a structural engineer and the urban forester's review for masonry fences, and no barbed wire or electric fences.
ZIP codes
77005
About 11 miles from our base in southeast Houston.

Cedar and pine privacy fences, new or replacing the old one.
$25 to $45per ft installed, 6 ft tall
Ask for this
Walk gates and driveway gates in iron or wood, built to swing without dragging.
$50 to $85per ft of iron fence, Houston average
Ask for this
Automatic openers for swing and sliding gates, plus keypads, remotes and repairs.
Priced after we see the gate
Ask for this
Broken hinges, snapped welds and sagging iron gates repaired instead of replaced.
Text a photo for a price
Ask for this
Leaning posts, loose pickets and storm damage. Small repairs are welcome.
$200 to $300typical repair in Houston
Ask for this
Fences and gates for lots, warehouses, shops and rental properties.
Priced per project
Ask for this
Concrete work around the property, from fence post footings to walkways and slabs.
Priced after we see the job
Ask for this
Remodeling projects for your home or business. Tell us what you have in mind.
Priced after we see the job
Ask for thisStill have a question? Call or text us. There is no charge and no obligation.
Free estimateYes, up to 12 inches taller if the gate is 40% opaque or less, like most iron gates.