Broken hinges, snapped welds and sagging iron gates repaired instead of replaced.
Get your free estimate
No obligation. We call or text you back to set it up.
Most iron gates and fences don't need to come down. They need a welder. A hinge that snapped, a latch that no longer lines up or a crack where a picket meets the rail can be cut, rebuilt and welded for much less than a new section.
In Houston the usual culprits are rust and weight. Humidity eats at joints and hinge pins, and a heavy driveway gate slowly pulls its post and drops until it drags on the concrete. Fixing it early keeps the damage from spreading through the frame.
Text us a photo of the damage and tell us where you are. We tell you whether a repair will hold or whether that piece really needs replacing, before anyone drives out.
This is not a quote. It is an approximate range so you know what to expect. The exact price is set only after a free visit to see your property, because the ground, slope, access and the old fence all change the cost. You never pay anything you have not approved first.
Cut off, rebuilt and rewelded so the gate swings and locks again.
Squared up and braced so they stop dragging on the concrete.
Ground clean and rewelded before the crack spreads through the frame.
Brackets, frames and panels made to match the fence you already have.
Fill out the form, call, or text a photo. It takes about two minutes.
Helen in English or Carlos in Spanish, to set a time to see the job.
We look at the job and give you a clear price before any work starts.
Still have a question? Call or text us. There is no charge and no obligation.
Free estimateOften, yes. Broken hinges, cracked welds and sagging frames can usually be welded and squared up for less than a new gate. Text a photo and we tell you if it is worth repairing.
Usually the hinge post has leaned, the hinges are worn, or the frame has twisted under its own weight. Each one has a different fix, which is why a photo helps.
Tell us what you have in mind when you call or send the form. Fences, gates and their hardware are what we do every day.
Walk gates and driveway gates in iron or wood, built to swing without dragging.
$50 to $85per ft of iron fence, Houston average
Ask for this
Automatic openers for swing and sliding gates, plus keypads, remotes and repairs.
Priced after we see the gate
Ask for this
Leaning posts, loose pickets and storm damage. Small repairs are welcome.
$200 to $300typical repair in Houston
Ask for thisWe are based in southeast Houston (77061) and drive to each job. These are the areas we cover, with what matters for fences in each one.
